Where to Hang a Floral Screenprint: A Room-by-Room Guide
By Starfangled Press | Because Art Makes Life Better | Published: 2026-11-01
Category: How-to Guides
A practical guide to placing the Better Homes and Gardens woodcut print, with steps for light, height, and hallway or console styling.
Quick answer
Hang the Better Homes and Gardens woodcut print where it gets soft, indirect light and has enough wall width for its 18 x 12.5 inch sheet, such as a hallway wall opposite a window or centered above a low console. Keep it out of direct sun and away from damp rooms.
Why the paper and print method change placement
This is a hand-pulled woodcut on 100 lb. Speckletone Cream Cardstock, so the paper is sturdy but still vulnerable to moisture and prolonged direct sunlight. A hallway or living area with filtered daylight is safer than a bathroom or a sun-blasted south-facing wall.
Because each print is signed and numbered in an edition of 50 and varies slightly from hand printing, treat it as a single piece rather than part of a mass-produced set. Give it breathing room instead of crowding it with frames.
Hallway lighting: what actually works
Hallways often have less light than living rooms, which can dull the cream paper and the woodcut's linework. If your hallway has a window at one end, hang the print on the opposite wall so it receives reflected light rather than direct sun.
In a windowless hallway, add a picture light or a nearby lamp. Avoid placing the print where a ceiling fixture throws hard glare across the glass or paper surface.
Above a console table: measure before you drill
A low console creates a natural anchor, but the gap between the tabletop and the bottom of the frame matters. Leave roughly 6 to 10 inches of wall space above the console so the print does not feel cramped against objects.
Center the print on the console's width, not the wall's width, if the console is off-center. This keeps the arrangement visually stable even when the wall is asymmetric.
Steps to place your floral screenprint
- Choose a room with stable light and low moisture: Pick a hallway, living room, or bedroom wall that receives indirect daylight. Skip bathrooms, kitchens with heavy steam, and walls in direct afternoon sun. If the only available wall gets direct sun, plan a UV-filtering frame or a different spot.
- Measure the wall and mark the center line: Use a tape measure and pencil to mark the horizontal center of the console, shelf, or wall section. The print is 18 inches wide, so confirm at least a few inches of clearance on each side. A print wider than the console looks top-heavy; size the furniture to the art, not the reverse.
- Set the hanging height: For a hallway, place the center of the print at about eye level, roughly 57 to 60 inches from the floor. Above a console, leave 6 to 10 inches between the tabletop and the bottom of the frame. Check the height from the spot where you will actually view it, not from across the room.
- Test the light before committing: Hold the print or a same-size paper template in place at different times of day. Watch for glare, shadow from nearby furniture, and how the cream paper reads against the wall color. If the paper blends into a cream wall, a thin dark frame or a slightly darker wall section restores contrast.
- Hang with the right hardware and frame: Use a frame sized for 18 x 12.5 inches or a custom mat, and choose wall hardware rated for the framed weight. Keep the print out of damp exterior walls and away from heat sources. Before drilling, confirm the frame backing is acid-free or archival to protect the woodcut paper.
Product facts that affect placement
- Better Homes and Gardens: Handcrafted fine art woodcut print on 100 lb. Speckletone Cream Cardstock, paper size 18 x 12.5 inches. The paper size sets your minimum wall width and frame choice, and the cream tone pairs best with warm or neutral walls rather than stark white.
Better Homes and Gardens - Better Homes and Gardens: Signed and numbered edition of 50, printed by hand in Brevard, NC, with subtle variations between prints. Because each print is unique, avoid hanging it in a spot where harsh light or humidity could damage a piece you cannot replace exactly.
